Installation (Continued)
Cautions:
•We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
•When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands and fingers.
First complete the electrical connections, and then check them for correctness.(a page 26)
The included Mounting Collar q is designed specially for this unit. Do not use it to attach any other model.
Power Connector
Mounting springs (C)
Insert Mounting Collar q into the
1 dashboard, and bend the mounting tabs out with a screwdriver.
The tabs to be bent vary depending on the vehicle. To securely install the unit, fully bend a number of the tabs so that
there is no rattling. | Tab |
Example: | |
q Mounting |
|
Collar |
|
Mounting Holes
Mounting Bolt
2 | Establish the rear connection of the unit. | |
After fixing Power Connector, fix the rear of the unit | ||
| ||
| to the vehicle body by either method (a) or (b) | |
| shown in the previous page. |
3 | After installation reconnect the negative |
Engage the Mounting Springs (C) in the mounting holes of the Mounting Collar q firmly.
Mounting |
Hole |
Mounting Spring
24
