23
Installation Guide (continued)
❏Installation Procedures
Note: Disconnect the cable from the negative (–) battery terminal.
1Mounting Collar
Dashboard
Mounting Tab
Screwdriver
2. Securre the rear of the unit.
a) Insert Power Connector to the unit.
b) Check the electrical connection by referring to this operating instructions.
c) Insert the unit into Mounting Collar and push it in until "click" is heard.
Unit
d) Secure the rear of the unit to the vehicle by either of the two recommended methods on the next
page.
Power Connector8
1. Secure the Mounting Collar .
Insert Mounting Collar into the vehicle's dashboard, and bend mounting tabs out with a
screwdriver.
When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure
your hands and fingers.
We strongly recommend you to wear gloves for installation work to protect yourself from injuries.