Preparation
1Set your car's ignition switch to the ACC or
ON position.
The demonstration screen appears.
2Press [DISP] (Display).
The demonstration screen is canceled, and no more
appears.
3Press [SRC] (PWR: Power).
Note: If you would like to turn on the power and make the
demonstration message appear, hold down [SRC] (PWR)
for more than 4 seconds.
The 12-hour system is used for the clock.
1Press [DISP] (CLOCK).
(clock display)
2Hold down [DISP] (CLOCK) for more than 2
seconds.
Hours blinks
3Adjust the hour.
Hours set
[[]: sets the hour ahead.
[]]: sets the hour back.
4Press [DISP] (CLOCK).
Minutes blinks
5Adjust the minute.
Minutes set
[[]: sets the minute ahead.
[]]: sets the minute back.
6Press [DISP] (CLOCK).
Complete
Notes:
¡“ADJUST” is displayed before adjusting the clock.
¡Hold down []]or [[]to change numbers rapidly.
Clock Display at Power Off
Press [DISP] to change the display.
Clock Setting
Display off
Clock display
ACC
ON
Battery
Installation
Pull the insulation film out from the
backside of the remote control
gently.nly
Note: Battery Information:
Battery Type:Panasonic lithium battery (CR2025) (Included in
the remote control)
Battery Life: Approximately 6 months under normal use (at
room temperature)
First Time Power On