Panasonic CQ-C3305W Hands-Free Phone System, Bluetooth Hands-Free Kit Mode, Speaker Selection

Hands-Free Phone System

Be sure to read “Safety Information” in the Operating Instructions for the Hands-Free Phone System before use.

	Connecting Hands-Free Phone System		Switch Unit
	Connect the Hands-Free Phone System (CY-BT100N)
	and establish the pairing. Refer to the instruction			Status indicator (Blue LED)
	manual for the Hands-Free Phone System for further			Lights: Call waiting/Talking
Preparation	information.			Stays out: Not connected
	Note: This unit is designed only for receiving calls. It			Blinks rapidly: Receiving a call
	cannot send calls.			Blinks slowly:
				Pairing/Reconnecting
				[Hang-on]/Blue LED
		[Hang-up]/Red LED

	1 Press [Hang-on]on the Hands-Free
	Phone System and pick up the phone.
	The phone is in the incoming state.
	2 Adjust the volume if necessary.
	3 Press [Hang-up]on the Hands-Free
	Phone System and hung up the phone.
	Notes:
	• “CONNECT” is displayed when information of the
Flow	calling party cannot be acquired.
	• To have another circle scroll while a telephone number
	is displayed, press [3] (SCROLL). If the number of
	displayed characters is 8 or less, the characters do not
Operation	scroll.
	Bluetooth Hands-Free Kit Mode
	This mode is not selectable by pressing [SOURCE],
	but activated by receiving an incoming call. (To pick up
	the phone, press [Hang-on]on the Bluetooth hands-
	free kit.)
	“HANDS-FREE” is scrolled when a call is coming in.
	The telephone number of the calling party is
	displayed.

Notes:	• We do not guarantee all the operations of connectable
• Only outline is described here. Refer to the operating	devices.
instructions for the Hands-Free Phone System for further
information.

	Adjust the Ring Volume	Reject Calls
	Turn [VOL] clockwise or	Pressing [Hang-up]allows users to reject a call when
(continued)	counterclockwise to adjust	the call is coming in.
	Notes:
	the ring volume when a call	Bluetooth Disconnection/Reconnection
	is coming in.	Pressing [Hang-up]allows users to temporarily
	: Up
	: Down	disconnect when the phone is in the waiting state.
		Pressing [Hang-on]allows users to reconnect when
Flow	• The volume level adjusted here is linked to the talk	the Bluetooth unit is temporarily disconnected.
	volume.
	• Depending on the model of a cellular phone, the ring
Operation	tone comes from the main unit of the phone but
	may be inaudible. In that case, the volume cannot be
	adjusted during an incoming phone call.

	1 Press [VOL] (PUSH SEL:	Speaker Selection
		(Setting range: LEFT, BOTH, RIGHT, default: BOTH)
	Select) to open the menu.
		SP LEFT:	Sound from left speaker
	2 Press [VOL] (PUSH SEL:	SP BOTH:	Sound from both speakers
			(Default)
		SP RIGHT:	Sound from right speaker
	Select) to select a mode	Notes:
	to be adjusted.
		• The volume can also be adjusted directly using [VOL]
	3 Turn [VOL] clockwise
Setting		on the main unit. ( Operating Instructions)
		• To return to the regular mode, press [DISP].
	or counterclockwise to	• If no operation takes place for more than 5 seconds
	adjust.	in audio setting (2 seconds in the volume adjustment)
Audio		the display returns to the regular mode.
	Volume Adjustment
	(Setting range: 0 to 40, Default: 18)
	\CQ-C5305W]
	: Up
	: Down
	[CQ-C3305W]
	: Up
	: Down

English

Hands-Free Phone System

18 CQ-C5305W/C3305W CQ-C5305W/C3305W 19