19
English
Radio
Up to 6 stations can be preset in AM (MW/LW), FM1,
FM2, and FM3 respectively.
Preset stations can be simply called up by pressing [}]
(P·SET) or [{] (P·SET).
Note: Direct selection can be executed with [1] to [6]
buttons on remote control.
Auto Preset Memory (APM)
1Select a band.
2Hold down [BAND] (APM)
for 2 sec. or
more.
Up to 6 best receiving stations are preset.
The preset stations under best receiving conditions
are received for 5 sec. each after presetting the sta-
tions (SCAN). To stop scanning, press [}]or [{].
Notes:
¡New stations overwrite existing saved stations.
¡Only RDS stations will be saved at default setting (AF
ON). To select non RDS stations too, set AF OFF. (a
Page 21)
Manual station preset
1Tune in to a station.
2Hold down [}]or [{]for 2 sec. or
more.
3Select a preset number by pressing [}]
or [{].
4Preset the station by holding down [}]
or [{] for 2 sec. or more.
Frequency/preset number blinks once.
Notes:
¡New stations overwrite existing saved stations.
¡In step 2, a station can be registered by holding down
the numeric button [1] to [6] for 2 sec. or more.
¡To stop presetting stations, press [DISP] (Display).
CQ-C7300N
BAND
Note: In AM mode, only LOCAL can be selected.
1Press [MENU] to open the menu.
(apage 16)
For using the remote control, hold down [MENU]
for 2 sec. or more.
2Press [MENU] to select a mode to be
adjusted.
The selection/adjustment screen appears 1 sec. after
mode selection.
3Press [BAND] (SET) to adjust the set-
ting value.
4Press [DISP] to return to the regular
mode.
Note: If no operation takes place for more than 10 sec-
onds, the display returns to Regular Mode.
FM MONO (Monaural)
Noise reduction when the receiving sensitivity becomes
low
Receiving in stereo (Default)
Receiving in mono and reducing the noise level
(lights.)
FM LOCAL/AM LOCAL
Setting when searching for a station
Searching even for a relatively low-intensity radio
wave station (Default)
Searching only for a high-intensity radio wave station
(lights.)
Often-tuned Station Preset
(APM: Auto Preset Memory, P·SET: Preset)
Radio Menu Display
MONO/LOCAL
18
Radio
1Press [SOURCE] to select the radio
mode.
2Press [BAND] to select a band.
Notes:
¡For tuning in on only stations whose receiving
conditions are good in the station search, set
LOCAL to ON. (apage 19)
¡For reducing noise when a receiving FM stereo
wave is weak, set FM MONO to ON. (apage 19)
3Select a station.
Frequency adjustment
[]] (TUNE):Lower
[[] (TUNE):Higher
Note: Hold down for 0.5 sec. or more and release
for station search.
Preset station selection
[{] (P·SET: Preset):Lower preset number
[}] (P·SET: Preset):Higher preset number
Note: Direct selection can be executed with [1] to
[6] buttons on remote control.
CQ-C7300N
BAND
Preset Number
Band Frequency
LOCAL IndicatorST (Stereo)
Indicator
Display change
Press [DISP] (Display) to change.
CT Clock Time
Normal
Display off
Frequency
PS
CT
Display off
AM (MW/LW) mode:
FM (not RDS) mode:
This chapter explains how to listen to the radio.