Panasonic CQ-RX300W General, Power On/Off, Volume Adjustment, Source Selection, Qusb Connector

General

[SRC] (Source)	Remote Control Sensor
selects a source.
[PWR] (Power)		[VOL] (Volume)
toggles power on/off.

[SQ] (Sound Quality)	AUX1 Connector (3.5 mm œ stereo)
selects a sound type (SQ).	From line output of external sound/audio device (ex. Silicon-
	audio player, HDD player, etc.)

Caution

• Set the volume level to low enough before the AUX connection is completed.

Failure to observe this, the loud noise may come out and damage your speakers and your hearing.

Power On/Off

Set your car’s ignition switch to the ACC or ON position.

Power on: Press [SRC] (PWR).

Power off: Hold down [SRC] (PWR) for more than 1 second.

Volume Adjustment

(Setting Range: 0 to 40, Default: 18)

Turn [VOL].

Source Selection

Press [SRC] to change the source.

QUSB Connector

\CQ-RX300W\

Radio

System-up Connector

(«Below)

AUX 1*

Disc Player

USB Connector

(«Right)

\CQ-RX300W\

When an optional USB memory is connected:

When loading MP3/WMA/AAC data

When an optional USB memory is not connected:

(«Continued below)

- 14 -