Panasonic CQ-RX103N SQ Changeover, Frequency Adjustment, Power On/Off Volume Adjustment, Pause

Preparation

General

\CQ-RX400N\ \CQ-RX300N\ \CQ-RX200N\

Radio (AM [LW/MW]/FM)

Audio Settings

Sound Control

		Set your car’s ignition switch	ACC		Press [SRC] (PWR: Power).
FirstTime	Power On	1 to the ACC or ON position.		2
			ON
		\CQ-RX400N\ \CQ-RX300N\ \CQ-RX200N\		4 Press [VOL] (PUSH SEL: Select) to select
		The demonstration message appears for initial
		use.			DEMO.
					Turn [VOL] counterclockwise.
of	Demonstration	Set your car’s ignition switch to the ACC or		5 For using the remote control, press [0] ().
		1 ON position.
		2 Press [SRC] (PWR: Power).

Note: For information about connectable devices, refer to the System Upgrade Guidebook or the instruction manual for each device.

Remote Control Sensor

[SRC] (Source)	[VOL] (Volume)
selects a source.
[PWR] (Power)
toggles power on/off.
[TA/AF]
(« “Radio Data System
(RDS) in FM Broadcasting”)

AUX1 Connector (3.5 mm œ stereo)

From line output of external sound/audio device (ex. Silicon- audio player, HDD player, etc.)

Note: The connector is labeled “AUX1”, but it appears on the display as “<AUX IN>”. («Below)

[SRC] (Source) selects a source.

[DISP] (Display)

switches the information on the display.

[BAND]

selects a band in the radio source. [APM] (Auto Preset Memory) executes APM in the radio source. (Hold it down for more than 2 seconds.)

[TUNE ] [TUNE ]	Radio Source Display
down/up the frequency. (Hold it down for more		Preset Number
than 0.5 seconds and release it for seek tuning.)
	Band	Frequency

lights while receiving an FM stereo signal.

Preset buttons [1] to [6]

selects a preset station in the radio source,

and presets the current station. (Hold it down for more than 2 seconds.)

[VOL]	Notes:
selects a value in the audio menu.	\CQ-RX400N\ \CQ-RX300N\ \CQ-RX200N\
(PUSH SEL) (Push to select)	• The sequence and contents of setting items may depend
selects items in the audio menu.	on the conditions of devices to be connected. For further
	information, refer to the System Upgrade Guidebook or
	the instruction manuals for the devices to be connected.
	\CQ-RX200N\ \CQ-RX103N\ \CQ-RX102N\
[DISP] (Display)	\CQ-RX101N\
	• If the fader is set to front, the pre-amp. output (rear) is
exits from the audio menu.
	decreased.

Press [VOL] (PUSH SEL) to open the audio menu.

1 Note: If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment,

10 seconds in the SQ adjustment), the display returns to the regular mode.

You have 6 preset modes (FLAT, ROCK, POP, VOCAL, JAZZ,
CLUB). You can customize your settings for these and save	(FLAT) flat frequency response:
them for instant recall.
	does not emphasize any part. (Default)

Genre	SQ Changeover		(ROCK) speedy and heavy sound:
	1	Press [VOL] (PUSH SEL:
			exaggerates bass and treble.
		Select) to open the audio menu.
Based on (Sound Quality)	2	Press [VOL] (PUSH SEL: Select) to select	(POP) wide-ranged and deep sound:
		SQ.	slightly emphasizes bass and treble.
	3	Turn [VOL] to select the sound	(VOCAL) clear sound:
		type as follows.	emphasizes middle tone and slightly emphasizes
			treble.
SQ

Cancellation	The demonstration screen appears.
	\CQ-RX400N\	Notes:
	\CQ-RX300N\ \CQ-RX200N\	• To return to the regular mode, press [DISP].
		• Refer to the section on “Function Settings”.
3	Hold down [VOL] (PUSH SEL: Select) for	• When “NO USB” (\CQ-RX400N\\CQ-RX300N\) or “NO
		DISC” is displayed, the Demonstration cannot be cancelled.
	2 sec. or more to open the function menu.

Caution

•Set the volume level to low enough before the AUX connection is completed.

Failure to observe this, the loud noise may come out and damage your speakers and your hearing.

AUX IN*:

\CQ-RX400N\ \CQ-RX300N\ \CQ-RX200N\

\CQ-RX103N\ \CQ-RX102N\ \CQ-RX101N\

	1 Press [SRC] to select the radio source.
		Frequency Adjustment
Flow		[TUNE ]: Lower
	2 Press [BAND] to select a band.
		[TUNE ]: Higher
		Note: Hold down for 0.5 sec. or more and release for station
		search.

2 Press [VOL] (PUSH SEL) to select a		3 Turn [VOL] clockwise or counterclockwise to
	mode to be adjusted.	adjust.

Volume
(Setting Range: 0 to 40, Default: 18)	: Up

Selection	Press [DISP] to return to the regular mode.	(JAZZ) jazz-specific deep sound:
	Note: Please refer to “Audio Settings” for the adjustment to	sound with emphasis on sharpness of high-hat and
		echo saxophone.
	each speaker.
SQ
		(CLUB) club and disco-specific sound:
		reproduction of realism being in a club.

		\CQ-RX400N\ \CQ-RX300N\	Note: Battery Information:
	Installation	Pull the insulation film out from	Battery Type: Panasonic lithium battery (CR2025) (Included
Battery			in the remote control)
		the backside of the remote control	Battery Life: Approximately 6 months under normal use (at
		gently.	room temperature)
		The 24-hour system is used for the clock.	5 Press [DISP].
		1 Select the radio AM mode. (« “Radio (AM
		[LW/MW]/FM)”).	Minute blinks
Setting		2 Press [DISP].	6 Adjust the minute.
		(clock display)	Minute entered
		Hold down [DISP] for more than	[]: sets the minute ahead.
Clock		3 2 seconds.
			[]: sets the minute back.
		Hour blinks	7 Press [DISP].
		4 Adjust the hour.	Completed
			Notes:
		Hour entered
			• “NO CT” is displayed before adjusting the clock.
			• When a broadcast of FM Radio Data System is received,
		[]: sets the hour ahead.	the clock is adjusted automatically by the Clock Time
		[]: sets the hour back.	service.
			• Hold down [] or [] to change numbers rapidly.

Power On/Off		Volume Adjustment
Set your car’s ignition switch to the ACC or ON position.	(Setting Range: 0 to 40, Default: 18)
Power on: Press [SRC] (PWR).	Turn [VOL].
Power off: Hold down [SRC] (PWR) for more
than 1 second.

	Source Selection
	Press [SRC] to change the source.						QUSB Connector \CQ-RX400N\ \CQ-RX300N\
	\CQ-RX400N\	\CQ-RX300N\					When an optional USB memory is connected:
							When loading MP3/WMA/AAC data
Operations	Radio					Disc Player
							When an optional USB memory is not connected:
	System-up			AUX 1*		USB Connector
	Connector
	(«Right)					(«Right)	QSystem-up Connector
	Note: Select USB Connector mode to operate the iPod
General	series connected with USB connector. (« System Upgrade						\CQ-RX400N\ \CQ-RX300N\ \CQ-RX200N\
	Guidebook)							When an optional device is connected:
	\CQ-RX200N\							Shift to connected device
								When connecting CD changer
	Radio				Disc Player
								When connecting iPod
	System-up Connector					AUX 1*
	(«Right)							When connecting Bluetooth Unit
	\CQ-RX103N\ \CQ-RX102N\ \CQ-RX101N\
	Radio		Disc Player			AUX*	OR
								When an expansion module is connected:
								The devices connected to the ports 1 to 4 are activated in
								sequence after shifting to AUX2 (device connected to the
								AUX terminal of the expansion module).

Operation	3 Select a station.		Preset Station Selection
			Press the corresponding preset button from [1]
			to [6] to tune in a preset station.
Change	Press [DISP] to change the display.
	AM (LW/MW) mode:	FM (not RDS) mode:		RDS mode:
	Band/		Band/	PS (Programme
	frequency		frequency	Service name)
Display	CT (Clock		PS	Band/frequency
	Time)
			CT	CT
	Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively.
	Preset stations can be simply called up by pressing [1] to [6].
Preset	Auto Preset Memory (APM)		Manual Station Preset
	With this operation, stations with good receiving conditions		1 Tune into a station.
	can be automatically stored in the preset memory.
	1 Select a band.		Hold down one of the preset buttons from
			2 [1] to [6] for more than 2 seconds.
Station	Hold down [BAND] (APM) for more than			(blinks once)
	2 2 seconds.
	The preset stations under best receiving conditions are received
	for 5 seconds each after presetting the stations (SCAN). To stop
			Note: New stations overwrite existing saved stations.
	scanning, press one of the buttons from	[1] to [6].

Note: New stations overwrite existing saved stations.

				: Down
			Bass
	(Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB)			: Increased
				: Decreased
			Treble
	(Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB)			: Increased
Menu				: Decreased
			SQ (Sound Quality)
Audio	(Setting Range: FLAT/ROCK/POP/VOCAL/JAZZ/CLUB, Default:			(«“Sound Control”)
	FLAT)
			SQ Adjustment
	(Tone/SQ adjustable range: B12 dB to A12 dB (by 2 dB))			/ : center frequency up/down
	Setting range:			[] []: Band selection
	SQ Low/Bass:	±12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)		[] []: Level up/down
	SQ Mid:	±12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
	SQ High/Treble: ±12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
			Balance
	(Setting Range: 15 levels each, Default: CNT (centre))			: Right enhanced
				: Left enhanced
			Fader
	(Setting Range: 15 levels each, Default: CNT (centre))			: Front enhanced
				: Rear enhanced

Notes:

•The volume can also be adjusted directly using [VOL] on the main unit. (« “General”)

•For further information on SQ (Sound Quality) settings, refer to “Sound Control”.

•Do not activate SQ and Bass/Treble at the same time to avoid causing sound distortion.

	You can adjust the characteristics of the currently selected		1	Press [VOL] (PUSH SEL:
	sound type (SQ). (« Above)
				Select) to open the audio menu.
	It is also possible to preset up to 5 different adjusted SQs.
	SQ3 (3-Band Sound Quality)		2	Press [VOL] (PUSH SEL: Select) to select
				SQ SET.
	Center frequency and level are adjustable in each of 3 bands.		3 Adjust each band.
	This lets you fine-tune sound quality for each genre to suit
	car-interior acoustics and your personal preferences.		/	: center frequency up/down
	Tone/SQ adjustable range: B12 dB to A12 dB (by 2 dB)		[] []: Band selection
	SQ Low/Bass:	±12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)	[] []: Level up/down
Adjustment	SQ Mid:	±12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)		Level
	SQ High/Treble: ±12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
				Frequency
	• The bass/treble control level of each frequency is fixed to the
			4	Hold down the numeric button [2] to [6] for
	frequency that has been selected for SQ.
	To return an adjusted SQ to the default setting			2 sec. or more.
	Select the SQ which is to be returned to the default setting.		• The adjusted SQ is preset in the number of the selected
SQ
	(Follow steps 1 to 3 in “SQ Changeover”. « Above)		button, and return to the regular mode resumes.
	Hold down [BAND] for 2 sec. or more.		• SQ Adjustment will not be saved unless it is preset. Always
			preset after making adjustments.

Notes:

•You cannot save any SQ presetting value in [1] button.

•Any SQ adjustments will not change the call up screen names such as ROCK and JAZZ.

•Do not activate SQ and Bass/Treble at the same time to avoid causing sound distortion.

Function Settings

[VOL]

selects a value in the function menu. (PUSH SEL) (Push to select) selects items in the function menu.

[DISP] (Display)

exits from the function menu.

Hold down [VOL] (PUSH SEL) for 2 sec. or more to open the function menu.
1 Note: If no operation takes place for more than 5 seconds in function setting, the display returns to the regular mode.
2 Press [VOL] (PUSH SEL) to select a	3 Turn [VOL] clockwise or counterclockwise to
mode to be adjusted.	adjust.

FM Monaural [FM]	(	: MONO ON
		lights.)
Noise is significantly decreased when weak signals are
received from an FM broadcast station.		: MONO OFF
	(Default)
FM Local [FM]	(	: LOCAL ON
		lights.)
Only stations with good reception are detected in seek
tuning.		: LOCAL OFF
	(Default)
AM Local [AM]	(	: LOCAL ON
		lights.)
Only stations with good reception are detected in seek
tuning.		: LOCAL OFF
	(Default)
Region ]RDS]		: The
	frequency is
Note: When the Region mode is switched from OFF to	changed only for
	programs within
ON or vice versa, the AF mode turns on automatically.
	the region.
		: The
	frequency is
	changed also
	for programs
	outside the
	region. (Default)
PTY Language		: English
]RDS]	(Default)
		: Swedish
(«Continued below)
	: On (Default)

Remote Control Unit \CQ-RX400N\ \CQ-RX300N\

Notes:

•This instruction manual explains operations for use with the buttons on the main unit. (Different operations excluded)

•Aim the remote control at the remote sensor and operate it.

Radio Data System (RDS) in FM Broadcasting

Useful functions such asAF, TA, PTY are available in the RDS (Radio Data System)-ready areas.

Some FM stations are broadcasting added data compatible with RDS. This radio set offers convenient functions using such data.

TA On/Off Traffic Information Only (TA Mute)

	Player (Disc Player)
Note: A disc which has both CD-DA data and MP3/WMA/AAC data on
		Playable Audio File
it may not be reproduced normally.

CD-DA Mode Display

Display Change

	Demonstration
Menu	\CQ-RX400N\ \CQ-RX300N\ \CQ-RX200N\
	You can set up the monitor to display or hide the	: Off
	demonstration screen.
	Note: Button operation with either the main unit or

[0] to [9]

selects a preset station (1 to 6),

presets the current station (Hold it down for more than 2 seconds.),

inputs the number in direct selection.

[#] (NUMBER)

executes the direct selection.

[RANDOM] [SCAN] [REPEAT] toggles on/off each play mode.

[] []

[BAND] (SET)

selects a band in the tuner source, toggles pause/play in player source, executes the APM (Auto Preset Memory) in tuner source

(Hold it down for more than 2 seconds).

[SRC] (SOURCE)	[MENU] (SEL: Select)
selects a source.	selects the items in the audio menu.
(POWER)
toggles power on/off.	[VOL] (volume)
	adjusts the volume, and selects the
	value in the audio menu, etc.

RDS service availability varies with areas. Please understand if RDS service is not available in your area, the following service is not available, either.

The following functions are available when receiving RDS stations.

AF (Alternative Frequency)			PTY (Programme Type)
The following functions are available when the AF mode is		The following functions are available when the PTY mode is
active (	lights).	active.
• When receiving conditions become bad, a station with better		• The PTY of receiving station appears.
receiving conditions is automatically tuned in to.		• Programs can be searched for by PTY.
• When executing APM, only RDS stations are selected.		Note: PTY language can be selected. («“Function Settings”)

Pressing [TA] toggles TA on and off.	For listening to only traffic information, activate TA and set
	the volume to 0 in FM mode.
Notes:	Once traffic information starts, the volume changes to the
• This operation is not adjustable by the remote control.	TA volume.
• Traffic information is available in monaural.
• Adjust the TA volume only while receiving a TA.

	CQ-RX400N	MP3/WMA/AAC
	CQ-RX300N	MP3/WMA/AAC
	CQ-RX200N	MP3/WMA
	CQ-RX103N	MP3/WMA
	CQ-RX102N	MP3/WMA
	CQ-RX101N	MP3/WMA
Printed side up	Notes for AAC playback is only for the model CQ-RX400N/
	CQ-RX300N.
Disc slot	[] []	[ ] (Eject)

Lights when the disc is loaded.

			Play	time
Track number
	Play	Mode indicators

Press [DISP] to change the display.

Disc Player	Disc Player (MP3/WMA/AAC
(CD-DA disc):	disc):
Normal	Normal
Disc title	Play time
Track title	Folder name/
	Album*

down/up the frequency (Hold it down for more than

0.5seconds and release it for seek tuning.)

[] []

skip to the previous/next folder in player mode. [] []

skip to the previous/next track/file in player mode. Hold it down for fast reverse/fast forward.

[MUTE]

toggles mute on/off.

(Only for remote control unit)

Note: You can select mute or

attenuation. (« “Function Settings”)

	• When calling up a preset station, a best receiving station is	Other functions of RDS
	selected automatically. (BSR Best Stations Research)
RDS?	Notes:	CT (Clock Time)
	• The AF sensitivity can be adjusted.	The clock is automatically adjusted.
	• The AF available range can be adjusted. (« “Function	PS (Programme Service Name)
	Settings”)
		As well as the frequency, the name of the broadcast station
is

PTY On/Off

Holding down [DISP] (PTY) for more than 2 seconds toggles PTY mode on and off.

Programme Search by PTY

Programs can be searched for by use of PTY that has been

Detailed PTY Selection

1 Press [] or [] to select PTY.

SPEECH	 MUSIC	 NEWS	 AFFAIRS	
INFO	 SPORT	 EDUCATE	 DRAMA	
CULTURE  SCIENCE  VARIED			 POP M	

takes a disc in with the	skip to the previous/next folder.	ejects the disc.
printed side facing up.

[SRC] (Source) selects a source.

MP3/WMA/AAC Mode Display

Folder number	File number
	Play Mode indicators

Clock	File name/
	Title, artist*
	Clock

*ID3/WMA/AAC Tag On/Off Hold down [3] for more

Direct Access

A track (CD mode), file, folder (MP3/WMA/AAC mode) can be directly selected.

Example: Track number 5

1 Press [#] (NUMBER).

2 Press [5].

3 Press [BAND] (SET).

Notes:

• To suspend direct selection, press [DISP].

[DISP] (Display)

switches the information on display, and exits the audio menu.

Put a battery in the
case with (+) side	
facing up.
Put the case back.



Warning

What	TA (Traffic Announcement)	appears.
		EON (Enhanced Other Network)
	The following functions are available when the TA mode is
	active ( lights).	RDS information is updated constantly in response to the
	• A TP station is automatically searched for and received at	current position.
	the instant of toggling the TA mode on if you are receiving a	EON-TA
	non-TP station or TP station with poor reception.	Traffic information from the current and other network stations
	• When executing station search or APM, only TP stations are
		can be received.
	selected.	Emergency Announcement Reception
	• Setting to TA on with the unit in another mode, it will
		Emergency announcement automatically appears on the
	automatically switch to radio mode and output the traffic
		display when it is received.
	announcement when the traffic announcement begins. The
	traffic announcement having finished, the unit will return to
	the previous mode. (TA Standby Mode)

TA (Traffic Announcement)

Type)

originally preset.

Press [1] to [6] to select PTY in the PTY mode.

	Programme Type	Contents
1	NEWS	NEWS
2	SPEECH	AFFAIRS, INFO, EDUCATE, DRAMA,
		CULTURE, SCIENCE, VARIED,
		WEATHER, FINANCE, CHILDREN,
		SOCIAL, RELIGION, PHONE IN,
		TRAVEL, LEISURE, DOCUMENT
3	SPORT	SPORT
4	POP M	POP M

ROCK M	 EASY M	 LIGHT M	 CLASSICS 
OTHER M  WEATHER FINANCE			 CHILDREN 
SOCIAL	 RELIGION  PHONE IN		 TRAVEL 
LEISURE	 JAZZ	 COUNTRY	 NATION M 
OLDIES	 FOLK M	 DOCUMENT

2 Press [BAND].

Search starts.

Notes:

•To stop searching, press [BAND] (SET).

•When there is no corresponding programme type station, “NONE” is displayed.

PTY Preset Change

[DISP] (Display) switches the information on the display.

(	) (Play/Pause)	[] []	[4]	(RANDOM)/[5] (SCAN)/[6] (REPEAT)
toggles pause/play in the player source.		skip to the previous/next track/file in	toggles on/off each play mode.
		the player mode.	[3]	(SCROLL)
		Hold down either of them for fast	scrolls the information on display.
		reverse/fast forward.

Notes:		• If you insert an 8 cm disc and cannot eject it, turn ACC of your car off
• Do not insert a disc when the	indicator lights.	once and turn it on again, then press [ ] (Eject).
• Refer to the section of “Notes on Discs” and “Notes on MP3/WMA/		• Do not insert foreign matter into the disc slot.
AAC”.

Player Source Display

Lights when folder random/repeat/scan is on.

than 2 seconds.

album title and song title/ artist name are displayed.

(Default)

folder name/file name are displayed.

Notes:

•For scrolling text, press [3] (SCROLL).

•“NO TEXT” is displayed when there is no information on the disc.

Function	remote control allows users to cancel the demonstration
	screen for 20 seconds and enable the selected operation
	even in the demo-on mode.
		Mute/Attenuation	: Volume down
			by 10 steps
	You can select mute or attenuation.
			: Volume off
			(Default)
	\CQ-RX400N\ \CQ-RX300N\	AUX1 Skip	: On (Skip
	\CQ-RX200N\		disabled.)
			(Default)
	If AUX1 is not used, the AUX1 mode is skipped when
	selecting the source.		: Off (Skip
			enabled.)
	\CQ-RX103N\ \CQ-RX102N\	AUX Skip	: On (Skip
	\CQ-RX101N\		disabled.)
			(Default)
	If AUX is not used, the AUX mode is skipped when
	selecting the source.		: Off (Skip
			enabled.)

Notes:

• To return to the regular mode, press [DISP].

• For folder selection, enter a number after pressing [#]

(NUMBER) twice.

Keep batteries and insulation film out of reach of infants. Batteries and insulation film can be ingested, so keep them out of the reach of infants. If an infant ingests a

(Programme

5	CLASSICS	CLASSICS
6	MUSIC	ROCK M, EASY M, LIGHT M,
		OTHER M, JAZZ, COUNTRY,

Original PTY presets can be changed as you like.

1 Select a PTY that you would like to preset.

•This unit does not support 8 cm discs.

Random Play

Folder Repeat Play (MP3/WMA/AAC)

\CQ-RX400N\ \CQ-RX300N\ \CQ-RX200N\

• The sequence and contents of setting items may depend on the conditions of devices to be connected. For further

Functions

Functions only on Main unit

The following functions are not available on remote control unit.

• Scroll	• Disc eject
• Tag on/off

Battery Replacement

Remove the battery holder with	Tough pointed object
the remote control unit placed on
a flat surface.
Stick your thumbnail into
the groove, and push the
holder in the direction of
the arrow, and at the same
time.	2
Pull it out in the direction	1
of the arrow using a tough	Back side
pointed object.

battery or insulation film, please seek immediate medical attention.

Caution

•Remove and dispose of an old battery immediately.

•Do not disassemble, heat or short a battery. Do not throw a battery into a fire or water.

•Follow local regulations when disposing of a battery.

•Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a fire.

Notes: Battery Information:

Battery Type: Panasonic lithium battery (CR2025) (Included in the remote control)

Battery Life: Approximately 6 months under normal use (at room temperature)

Frequency)	AF Level	PI Seek (Programme Identification Seek)
	Hold down [TA] (AF) for more than 2 seconds to select AF	If reception becomes poor when tuning in a preset station,
	level.	press the same preset number button. The same station with
		better reception will be searched for.
		Press same preset number button again to cancel.
(Alternative	Low level AF operating sensitivity. (Default)
	High level AF operating sensitivity.	(blinks)
		Note: For PI Seek, cancel the TA mode first, then execute PI
	When the AF network of an RDS station is not	Seek.
AF	required.

PTY

NATION M, OLDIES, FOLK M

Another station in the same PTY is searched for by pressing [BAND].

Notes:

•When there is no corresponding programme type station, “NONE” is displayed.

•A desired PTY appears for 5 seconds.

•Preset contents are changeable.

2 Follow the procedure of ordinary presetting. (« “Station Preset” in “Radio (AM [LW/MW]/FM)”)

Operation Flow

1 Press [SRC] to select the Disc Player source.

2 Select a desired portion.

Track/File Selection

Press [] / [].

Note: To perform fast forward/reverse, hold down either of them.

Disc Player (CD-DA disc):

Previous/next track

Disc Player (MP3/WMA/AAC disc):

Previous/next file

Folder Selection (MP3/WMA/AAC)

Press [] / [].

Pause

Press [BAND] ( ).

Press again to cancel.

Random, Repeat, Scan

All the available songs (tracks/files) are played in a random sequence.

Press [4] (RANDOM).

Press again to cancel.

Folder Random Play (MP3/WMA/AAC)

All the available files in current folder are played in a random sequence.

Hold down [4] (RANDOM) for more than 2 seconds.

Hold down again to cancel.

Repeat Play

The current song (track/file) is repeated.

Press [6] (REPEAT).

Press again to cancel.

The current folder is repeated.

Hold down [6] (REPEAT) for more than 2 seconds.

Hold down again to cancel.

Scan Play

The first 10 seconds of each songs (tracks/files) is played in sequence.

Press [5] (SCAN).

Press again to cancel.

Folder Scan Play (MP3/WMA/AAC)

From the next folder, the first 10 seconds of the first file in each folder is played in sequence.

Hold down [5] (SCAN) for more than 2 seconds.

Hold down again to cancel.

information, refer to the System Upgrade Guidebook or the instruction manuals for the devices to be connected.