Settings (continued)

English

USER SCREEN AUDIO

DVD INPUT/OUTPUT RADIO

 

DISPLAY UNIT

31Display adjustment

 

TILT

 

 

(Tilt angle adjustment)

 

1

2

3

4

5

1

5

 

 

 

 

 

 

 

 

 

 

default:

5

OPEN/CLOSE

(Monitor setting when power on)

 

AUTO

 

: the monitor is opened automatically

 

 

 

 

when turning ON ACC.

 

 

MANUAL : the monitor is not opened automatically. default: MANUAL

Note:

¡The monitor position setting menu can also be dis- played by pressing the [TILT] button on the main unit for more than 2 seconds. (a page 17)

CLOCK

Clock setting

DISPLAY

(Clock display)

ON : clock display ON (“12:00” is displayed

before adjusting the clock.)

OFF

: clock display OFF

default: OFF

HOUR ADJUST (Hour adjustment)

] : puts back hour.

[ : puts forward hour.

MINUTE ADJUST (Minute adjustment) ] : puts back minute.

[ : puts forward minute.

Note:

¡To start the clock, touch/press /[SRC]. ¡Set the Daylight Saving Time manually.

default: HOUR ADJUST: 12 MINUTE ADJUST: 0

ID-CODE

ID Code Setting

Prior to operating this unit, it is advisable to assign a 4- digit ID code for security. Once the ID code has been set, the unit cannot be operated if the main power supply is disconnected then re-connected. It is electronically locked so that a thief cannot use the stolen unit unless that per- son knows the code you have set.

The ID code operation must be performed only by the person to whom the unit belongs.

Generally, it is not necessary to enter the ID code each time when using the unit if it has not been disconnected from the main power supply (car battery).

0 to 9 4 digits numeric code

default: none

How to set your ID code (for the first time)

qEnter a 4 digit ID code.

wEnter the same 4 digit ID code again.

How to change your ID code

qEnter the preset (old) 4 digit ID code. If the wrong ID code is entered, a new ID code cannot be registered.

wEnter a new 4 digit ID code.

eEnter the new 4 digit ID code again.

How to cancel the known ID code

qEnter the preset (old) 4 digit ID code. If the wrong ID code is entered, it is not possible to cancel the ID code

function.

wTouch and hold until “COMPLETED!” is dis- played. The ID code cancelling procedure is completed. The unit now works without an ID code.

Note:

¡Should your unit ever require service, cancel your ID code before sending for repair.

¡The ID code setting cannot be eliminated even by the memory clear function.

¡The inputted code is not displayed for your security.

Caution

¡Record your registered ID code and keep it in a secure location. (Fill in the ID code memo (a page 46).) If you forget it, you will be unable to use the unit. In case you forget the ID code, please consult your nearest Panasonic Servicenter.

32

CQ-VD7005U

Page 32
Image 32
Panasonic CQ-VD7005U warranty Display Unit, Clock, Id-Code, Open/Close