Panasonic CS-MKS9NKU appendix Setting the Timer, How to set the present time, Operation Indication

SETTING THE TIMER

NOTE

In the descriptions below, the following settings are used for the temperature and time indicator selector button on the bottom front section of the remote controller.

•Temperature: °F

•Time: AM, PM

1.How to set the present time

(Example) To set to 10:30 pm.

	Operation	Indication
1.	Press the CLOCK button once if	The time indication alone flashes.
	the time indicator is not flashing.
2.	Press the Advance, Return ( ,	The time can be set in 1-minute
	) button until PM 10:30 is	increments. Holding down the button
	displayed.	advances the time rapidly in 10-minute
		increments.
3.	Press the CLOCK button again.	This completes the setting of the
		current time.

2.How to set the OFF time (Example) To stop the air conditioner at 11:00 am.

	Operation		Indication
1.	Press the OFF TIME setting	The timer	indication is displayed,
	button once.	and the present OFF time is shown.
2.	Press the Advance, Return ( ,	The timer	indication blinks.
	) button until AM 11:00 is	The time can be set in 10-minute
	displayed.	increments. Holding down the button
		advances the time rapidly in 10-minute
		increments.
3.	Wait a few seconds, and then the	The timer	indication stops
	setting is complete.	blinking and the present time is
		displayed.

17