Panasonic CU-W7DKR manual How To Operate, Auto,Heat,Cool,Dry, Select the desired operation, Hint

Models: CU-W12DKR CU-W9DKR CU-W7DKR CS-W9DKR CS-W7DKR CS-W12DKR

1 6
Download 6 pages 53.26 Kb
Page 3
Image 3
Operation Details

CS-W7DKR CU-W7DKR / CS-W9DKR CU-W9DKR / CS-W12DKR CU-W12DKR

Operation Details

AUTO - Automatic Operation

The unit will automatically select the operation mode according to the room temperature.

Once the operation mode is selected, the unit will operate at the standard setting temperature as shown:

Room

Operation

Standard

setting

temperature

mode

temperature

 

 

 

 

 

23°C & above

Cool

25°C

 

 

 

Below 23°C

Dry

22°C

 

 

 

Below 20°C

Heat

21°C

 

 

 

You may press AUTO - Automatic Operation or HOW TO OPERATE button to change the standard setting temperature to “HI” or “LO” as shown:

Operation mode

HI

LO

 

 

 

Cool

27°C

23°C

 

 

 

Dry

24°C

20°C

 

 

 

Heat

23°C

19°C

 

 

 

HOW TO OPERATE

Auto,Heat,Cool,Dry

2

Select the desired operation.

AUTO

DRYHEAT

COOL

1

Start the operation.

HEAT - Heating Operation

Enables you to enjoy the warming effect at your preferred setting temperature.

The range of temperature can be selected from 16°C ~ 30°C.

COOL - Cooling Operation

Enables you to enjoy the cooling effect at your preferred setting temperature.

The range of temperature can be selected from 16°C ~ 30°C.

DRY - Soft Dry Operation

Enables you to set the desired temperature at low fan speed which provides you with the dehumidifying surroundings.

The range of temperature can be selected from 16°C ~ 30°C.

Hint

3

Set the temperature.

Supersonic air purifying device (super alleru-buster) operates automatically while the air conditioner is switched on.

Powerful, Quiet and Ion operations could be activated in all

operation modes.

OFF/ONAuto,Heat,Cool,Dry

 Press Select the desired operation. button again to stop the operation.

To save electricity, close the curtains when using air conditioner to prevent sunlight and heat from coming in.

Troubleshooting

The room has a peculiar odour.

Air conditioner does not cool or heat efficiently.

In heating operation Power indicator blinking, no warm air discharge.

This may be a damp smell emitted by the wall, carpet, furniture or clothing in the room.

Ensure the temperature has been set correctly.

Ensure windows and doors have been closed properly.

Ensure filters are cleaned or replaced when necessary.

Ensure inlet and outlet vents of outdoor unit have not been obstructed.

Defrost operation at outdoor unit, maximum 12 minutes.

41

Page 3
Image 3
Panasonic CU-W7DKR How To Operate, Auto,Heat,Cool,Dry, Select the desired operation, Start the operation, operation modes