REMOTE CONTROL OPERATION (MODELS CT-27C8 AND CT-32C8)

Programming The Remote

The Universal Remote Control can be programmed to
operate many manufacturers' components, using the
component function buttons for VCR, DVD, CABLE or
DBS. Follow the procedures for programming your Remote
Control with or without a code for the component.
TV TV (Panasonic Only)_ PanasonJcCode
DBS CBL(Preset)
VCR JVOR (Preset) _ PanasonicCode
DVD I DVD (Preset) _ PanasonJcCode
Note: Determine the manufacturer of the component and look
in the table for the code (found on page 9).
Procedure
Confirm that the external component is plugged and
operating.
Turn the component off.
ACTION O
Press and together, for at least 5
seconds.
Press appropriate component button on the Remote
Control VCR, DVD, CABLE or DBS.
Enter the 3-digit component code using the Remote
Control numeric keypad (0 ~9 buttons).
Press the Remote Control _--_ to test the
component. If the procedure was successful, the
component will turn on.
Note: If the component does not operate with the Remote
Control repeat the procedure using another code.
(Some brands have multiple codes). If an incorrect code
is entered, or if the procedure takes longer than 30
seconds, the programming will fail.

Programming Without A Code

This procedure searches all codes and is called the
"sequence method."
Confirm that the external component is plugged in
and on.
Turn the component off.
A_ON and O
Press together, for at least 5
seconds.
Press appropriate component button on the
Remote Control.
Press VOL • to move forward to the next code.
Press • VOL to move backward.
Press the Remote Control _ to test the
component. If the procedure was successful, the
component will turn on.
Note: Repeat the above steps until the component code is
found. It may take many attempts before the correct
code is found.
ACTION
After the code is found, press to store the
code.
Component Codes
The Universal Remote Control is capable of operating
many component brands after entering a code. Some
components may not operate because the codes are not
available due to limited memory. The Universal Remote
Control does not control all features found in each model.
VCR
DBS
CABLE DVD |
8o