5
ENGLISH
■ Operation Details
AUTO, HEAT, COOL, DRY
COOL - Cooling Operation
• Enjoy cool air at your desired
temperature.
DRY - Soft Dry Operation
• Keeps your environment
dehumidified by running a very
gentle cooling operation.
• During soft dry operation, the
indoor fan operates at low fan
speed.
AUTO - Automatic Operation
• Unit selects the operation mode
according to temperature setting,
outdoor and room temperature.
• The power indicator blinks during
operation.
• Operation mode is reselected
every 30 minutes.
• In heating mode, it takes a while
for the unit to warm up. The
power indicator blinks during this
operation.
HEAT - Heating Operation
Select the
desired
operation.
Set the
temperature.
(16°C~30°C)
Start the
operation.
Troubleshooting
FAN
SPEED
AIR
SWING
AUTO
HEAT
COOL
DRY
ION
OFF/ON
TEMP
MODE
QUIET
AIR SWING
TIMER
ON SET
OFF CANCEL
AC RC
RESETSET CHECK CLOCK
INVERTER
1 32
POWERFUL FAN SPEED
ion
2
2
3
3
1
1
■ Hint
• A temperature setting 1°C higher
in cooling operation or 2°C lower in
heating operation than the desired
temperature equates to a 10%
power saving.
● Mist emerges from indoor unit. ► Condensation effect due to cooling process.
● Heating/Cooling operation does not work. ► Ensure temperature is set correctly.
► Make sure windows and doors are closed.
► Make sure filters are cleaned and replaced.
► Make sure inlet and outlet vents are cleared.
● Water flowing sound during operations. ► Cause by refrigerant flow inside the unit.
● The power indicator blinks during the operation and
the indoor fan is stopped.
► The unit is in defrost mode, and the melted frost is drained from the
outdoor unit.