ENGLISH
5
AUTO
HEAT
FAN
SPEED
AIR
SWING
COOL
DRY
TEMP
AIR SWING
FAN SPEED
QUIET
POWERFUL
TIMER
ON
123
OFF
SET
CANCEL
MODE
OFF/ON
AC RC
SET
CLOCK
CHECK RESET
■ Hint
• A temperature setting 1°C higher
in cooling operation or 2°C lower in
heating operation than the desired
temperature equates to a 10%
power saving.
AUTO, HEAT, COOL, DRY

● Supersonic air purifying device operates automatically once

the unit is switched on.

●

POWERFUL

and QUIET operations are available in all modes.

● Press

OFF/ON

again to stop the operation.

OFF/ON

Start the

operation.

2
2
MODE

Select the

desired

operation.

1
1
4%-0

Set the

temperature.

(16°C~30°C)

3
3
Troubleshooting
● Mist emerges from indoor unit. ► Condensation effect due to cooling process.
● Heating/Cooling operation does not work. ► Ensure temperature is set correctly.
► Make sure windows and doors are closed.
► Make sure fi lters are cleaned and replaced.
► Make sure inlet and outlet vents are cleared.
● Water fl owing sound during operations. ► Cause by refrigerant fl ow inside the unit.
● The power indicator blinks during the operation and
the indoor fan is stopped.
► The unit is in defrost mode, and the melted frost is drained from the
outdoor unit.
■ Operation Details
COOL - Cooling Operation
• Enjoy cool air at your desired
temperature.
DRY - Soft Dry Operation
• Keeps your environment
dehumidifi ed by running a very
gentle cooling operation.
• During soft dry operation, the
indoor fan operates at low fan
speed.
AUTO - Automatic Operation
• Unit selects the operation mode
according to temperature setting,
outdoor and room temperature.
• The power indicator blinks during
operation.
• Operation mode is reselected
every 30 minutes.
• In heating mode, it takes a while
for the unit to warm up. The
power indicator blinks during this
operation.
HEAT - Heating Operation