Panasonic CU-KC9NKH-3, CU-KC12NKH-3 To Monitor Human Presence & Activity, For Energy Saving

	TO MONITOR HUMAN
6 7	PRESENCE & ACTIVITY	ECONAVI/
	FOR ENERGY SAVING &	AUTO COMFORT
	COMFORT

TO SET THE TIMER

• To turn ON or OFF the unit at a preset time.

ECONAVI	To optimize energy saving
AUTO	To maximize comfort
COMFORT
Heat Source & Movement Low High Normal None
COOL/DRY Mode
			+2°C
Set Temperature		+1°C

ON

1

OFF

Select ON or

OFF timer

2

Set the time

SET

Confirm

	+1 tap*	-1°C	≤ Medium
Set Fan Speed		+1 tap	Fan

* For first 15 minutes or until set temperature is reached.

•The human activity sensor may not detect moving objects further than 7m away or beyond detection angle.

•The human activity sensor sensitivity is influenced by indoor unit location, movement speed, temperature range, etc.

•The human activity sensor may:

-Mistakenly detects an object with heat source & movement similar to human, such as pets, etc. as human being.

-Mistakenly detects as non-heat source & movement if a person stays motionless for certain period of time.

8Press and hold for 5 seconds to dim or restore the unit’s indicator brightness.

9Press and hold for approximately 10 seconds to show temperature setting in °C or °F

10Press to restore the remote control’s default setting.

11Not used in normal operations.

• To cancel ON or OFF timer, press	ON
	or OFF then

press CANCEL.

•When ON Timer is set, the unit may start earlier (up to 15 minutes) before the actual set time in order to achieve the desired temperature on time.

•Timer operation is based on the clock set in the remote control and repeats daily once set. For clock setting, please refer to Remote Control Preparation on the back cover.

•If timer is cancelled manually or due to power failure, you can restore the previous setting (once power is resumed) by pressing SET .

NOTES

AUTO

COMFORT ECONAVI

,

•Can be activated in all modes and can be cancelled by pressing the respective button again.

•Cannot be selected at the same time.

5