Panasonic DM0706SY0 Battery charge, Range/Distance “No link to base.”, Question, Cause & solution

Question	Cause & solution
Why call waiting	LYou may be required to change the recall time to “90ms”.
does not work when	(Default: “100ms”)
I press {RECALL}?	LMake sure you have subscribed to the call waiting service.
	Consult your service provider/telephone company.
Battery charge
Question	Cause & solution
How do I charge the	LMake sure that the battery is properly installed in the handset
battery?	and the cover is closed. Place the handset on the base unit or
	charger and confirm “Charging” is displayed.
	LIt takes approx. 7 hours to charge the empty battery (see front
	page). When it is fully charged, “Charge completed” is
	displayed.
Can I leave the	LYou can place the handset on the base unit or charger
handset on the	anytime. Battery is not overcharged and there is no damage
base unit or charger	to the battery. By placing the handset on the base unit or
after battery is fully	charger, it is always fully charged.
charged or each
call is finished?
Where can I buy	LBattery can be purchased through your local retailer.
new battery?
Range/Distance (“No link to base.”)
Question	Cause & solution
What is the range/	LRange/distance is related to technology and environmental
distance of my	factors. Therefore we cannot provide a given range or
cordless phone?	distance.
(Why am I getting	LMake sure that the AC adaptor is properly connected to wall
short or poor range/	socket and to the base unit and that beep tones sound when
distance on my	you page the handset from the base unit.
cordless phone?)	LMove closer to the base unit (Allow up to 60 seconds for the
Why is “No link
	handset to reassign to the base unit.).
to base.”	LIf you try manual registration process, allow up to 60 seconds
displayed on the	for the handset to reassign to the base unit.
handset when I
	LIf the above remedies do not solve the problem, refer to the
press {C}?
	troubleshooting section in your Operating Instructions for
	more information.

– 2 –