RTC battery
Description | Spare part number |
|
|
RTC battery (includes cable and | |
|
|
Before removing the RTC battery, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the battery (see Battery on page 67), and then remove the following components:
a.Service cover (see Service cover on page 69)
b.Smart Card reader (see Smart Card reader on page 70)
c.Optical drive (see Optical drive on page 71)
d.Hard drive (see Hard drive on page 75)
e.Modem module (see Modem module on page 84)
f.Keyboard (see Keyboard on page 86)
g.Base enclosure (see Base enclosure on page 91)
Remove the RTC battery:
1.Disconnect the RTC battery cable (1) from the TouchPad.
2.Detach the RTC battery (2) from the TouchPad. (The RTC battery is attached to the TouchPad with
3.Remove the RTC battery.
104 Chapter 4 Removal and replacement procedures
