Reverse this procedure to install the RTC battery.

Display lid switch board

Description

Spare part number

 

 

Display lid switch board (includes cable)

684340-001

 

 

Before removing the display lid switch board, follow these steps:

1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect the power from the computer by unplugging the power cord from the computer.

3.Disconnect all external devices from the computer.

4.Remove the battery (see Battery on page 67), and then remove the following components:

a.Service cover (see Service cover on page 69)

b.Smart Card reader (see Smart Card reader on page 70)

c.Optical drive (see Optical drive on page 71)

d.Hard drive (see Hard drive on page 75)

e.Modem module (see Modem module on page 84)

f.Keyboard (see Keyboard on page 86)

g.Base enclosure (see Base enclosure on page 91)

Remove the display lid switch board:

1.Position the computer with the front toward you.

2.Disconnect the display lid switch board cable (1) from the LIF connector on the system board.

Component replacement procedures 105

Page 113
Image 113
HP 8470p C7A68UT, 8470w C7A68UT manual Display lid switch board