„ Charging

 

Supplied battery

Optional battery

Charging time¼

Approx. 100 min

Approx. 130 min

¼with the supplied charger

The charging time will vary slightly depending on the status of the battery and the conditions in the charging environment.

When the charging has been completed successfully, the [CHARGE] indicator turns off.

Note

The battery may swell and its operating time may become shorter as the number of times it is charged increases. For long term battery use, we recommend you do not frequently charge the battery before it is exhausted.

The performance of the battery may temporarily deteriorate and the operating time may become shorter in low temperature conditions (e.g. skiing/snowboarding).

Inserting/Removing the Battery/Card (Optional)

Check that the camera is turned off.

We recommend using a Panasonic card.

1

Slide the release lever in the direction of

 

the arrow and open the card/battery door.

• Always use genuine Panasonic batteries (CGA- S/106B: supplied or DMW-BCF10PP: optional).

• If you use other batteries, we cannot guarantee the quality of this product.

2

Battery: Insert it fully being careful about

 

the direction for insert. Pull the lever A

in the direction of the arrow to remove the battery. Card: Push it fully until it clicks being careful about the direction for insert. To remove the card, push the card until it clicks, then pull the card out upright.

B Do not touch the connection terminals of the card.

The card may be damaged if it is not fully inserted.

12 VQT2T42 (ENG)

Page 12
Image 12
Panasonic DMC-F2 Inserting/Removing the Battery/Card Optional, Slide the release lever in the direction