Others
- 125 -
[Memory Card Error
Format this card?]
• It is a format that cannot be used with this unit.
pFormat the card again with the camera after saving necessary data on a PC etc. (P45)
[Please turn camera off and then on again] / [System Error]
• This message appears when the camera is not operating properly.
pTurn the camera off and on. If the message persists, contact the dealer or your
nearest Service Center.
[Memory card parameter error] / [This memory card cannot be used]
pUse a card compatible with this unit. (P16)
–SD Memory Card (8 MB to 2 GB)
–SDHC Memory Card (4 GB to 32 GB)
–SDXC Memory Card (48 GB, 64 GB)
[Insert SD card again] / [Try another card]
• An error has occurred accessing the card.
pInsert the card again.
pInsert a different card.
[Read Error/Write Error Please check the card]
• It has failed to read or write data.
pRemove the card after turning the power off. Insert the card again, turn the power on,
and try to read or write the data again.
• The card may be broken.
pInsert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the
card]
• Use a card with SD Speed Class with “Class 6” or higher when recording motion
pictures.
• In the event that it stops even after using a “Class 6” card or higher, the data writing
speed has deteriorated so it is recommended to make a backup and then format (P45).
Depending on the type of card, motion picture recording may stop in the middle.
[This card is not formatted with this camera, and not suitable for movie recording.]
• The writing speed is lower if the card has been formatted using a PC or other
equipment. As a consequence, motion picture recording may stop in the middle. If this
happens, make a backup of the data and format (P45) the card in this unit.