25
(ENG) VQT1T03
Connecting to other equipment
Connecting to a PC
You can acquire recorded pictures to a PC by connecting the camera and the PC.
•You can easily print out or mail the pictures you have imported. Use of the
“PHOTOfunSTUDIO-viewer-” bundled software on the CD-ROM (supplied) is a convenient
way of doing this.
•Read the separate operating instructions for the supplied software for more information about
the software in the CD-ROM (supplied) and how to install it.
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.

Connect the camera to a PC via the USB connection cable A

(supplied).

•Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause malfunction.
AUSB connection cable (supplied)
•Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause trouble.)
BAlign the marks, and insert.
CAC adaptor (DMW-AC5G; optional)
•Use a battery with sufficient battery power or the AC adaptor (DMW-AC5G; optional). If the
remaining battery power becomes low while the camera and the PC are communicating, the
status indicator blinks and the alarm beeps.
Refer to “Disconnecting the USB connection cable safely” before disconnecting the USB
connection cable. Otherwise, data may be destroyed.
1
DC IN
AV OUT/
DIGITAL
COMPONENT
OUT
DMC-FX180GC-VQT1T03_mst.book 25 ページ ２００８年７月１４日　月曜日　午後３時１３分