Panasonic VQT1J82, DMC-FX33 Available flash range in Intelligent ISO, Wide Tele, ISO1250

Advanced (Recording pictures)

∫Available flash range in Intelligent ISO

Maximum	Available flash range
ISO
sensitivity	Wide	Tele
level (P58)
ISO400	Approx.	Approx.
	60 cm	40 cm
	(1.97 feet) to	(1.31 feet) to
	approx. 4.0 m	approx. 2.0 m
	(13.1 feet)	(6.56 feet)
ISO800	Approx.	Approx.
	80 cm	60 cm
	(2.62 feet) to	(1.97 feet) to
	approx. 5.6 m	approx. 2.8 m
	(18.4 feet)	(9.19 feet)
ISO1250	Approx. 1.0 m	Approx. 80 cm
	(3.28 feet) to	(2.62 feet) to
	approx. 7.0 m	approx. 3.5 m
	(23.0 feet)	(11.5 feet)

∫Shutter speed for each flash setting

Flash setting				Shutter speed
				(Sec.)
	:		AUTO
	:		AUTO/
			Red-eye
			reduction	1/30 to 1/2000
	:		Forced ON
	:		Forced ON/
			Red-eye
			reduction
		:	Slow sync./	1/8¢1 to
			Red-eye	1/2000
			reduction	1/4 or 1 to
				1/2000¢2
:			Forced OFF	1/8¢1 to
				1/2000
				1/4 or 1 to
				1/2000¢2, 3

¢1 The shutter speed changes depending on the slow shutter setting. (P65)

¢2 When Intelligent ISO is set

¢3 [SPORTS], [BABY1]/[BABY2] and [PET] in scene mode (P41)

•¢2, 3: The shutter speed becomes a maximum of 1 second in the following cases.

–When the optical image stabilizer is set to [OFF].

–When the camera has determined that there is little jitter when the optical image stabilizer is set to [MODE1] or [MODE2].

•In intelligent auto mode [ ], shutter speed changes depending on the identified scene.

•There will be differences in the above shutter speeds in the following scene modes.

–[NIGHT SCENERY]:

8 seconds to 1/2000th of a second

–[HI-SPEED BURST]:

1/8th of a second to 1/2000th of a second

–[STARRY SKY]:

15 seconds, 30 seconds, 60 seconds

–[FIREWORKS]:

1/4th of a second, 2 seconds

•Do not look directly at the flash at close range when it is activated.

•If you bring the flash too close to an object, the object may be distorted or discolored by the heat or lighting from the flash.

•In economy mode, the LCD monitor turns off and the status indicator lights while the flash is charging. [This does not happen when using the AC adaptor (DMW-AC5PP; optional).]

If the remaining battery power is low, the length of time that the LCD monitor turns off to charge may become longer.

•When you take a picture beyond the available flash range, the exposure may not be adjusted properly and the picture may become bright or dark.

•When the flash is being charged, the flash icon blinks red, and you cannot take a picture even when you press the shutter button fully.

•The white balance may not be properly adjusted if the flash level is insufficient for the subject. (P57)

37

VQT1J82