Panasonic DMC-FX500 Shutter VOL, Beep Tone Shutter Tone, REC. Info Pattern, Off/Set, Auto LCD OFF

Preparation

r[BEEP]

This allows you to set the beep and shutter sound.

r [BEEP LEVEL]:			[SHUTTER VOL.]:
[s] (Muted)	[		] (Muted)
[t] (Low)	[		] (Low)
[u] (High)	[		] (High)
[BEEP TONE]:		[SHUTTER TONE]:
[ 1 ]/[ 2 ]/[ 3 ]	[	1 ]/[ 2 ]/[ 3 ]

u[VOLUME]

Adjust the volume of the speaker to any of 7 levels.

•When you connect the camera to a TV, the volume of the TV speakers does not change.

[GUIDE LINE]

Set the pattern of the guide lines displayed when taking pictures. You can also set whether or not to have the recording information displayed when the guide lines are displayed. (P40)

[REC. INFO.]:	[PATTERN]:
[OFF]/[ON]	[ ]/[ ]

• The [PATTERN] setting is fixed to [ ] in the Intelligent auto mode.

[HISTOGRAM]

This allows you to set either to display or not display the histogram. (P41)

[OFF]/[ON]

Set the departure date and the return date of the vacation.

—[TRAVEL DATE]

[OFF]/[SET]

•Refer to P63 for details.

q[ECONOMY]

The camera is automatically turned off if the camera has not been used for the time selected on the setting.

Also, it will turn off the LCD monitor automatically when not in use to prevent discharge of the battery.

p[POWER SAVE]:

The camera is automatically turned off if the camera has not been used for the time selected on the setting.

[OFF]/[2MIN.]/[5MIN.]/[10MIN.]

[AUTO LCD OFF]:

When taking pictures, the LCD monitor is automatically turned off if the camera has not been used for the time selected on the setting.

[OFF]/[15SEC.]/[30SEC.]

•Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].

•[POWER SAVE] is set to [5MIN.] in the Intelligent auto mode.

•[POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].

•The status indicator lights while the LCD monitor is turned off. Press any button to turn on the LCD monitor again.

24 VQT1Q36