Panasonic DMC-FX55 Taking pictures that match the scene being recorded Scene mode

Advanced (Recording pictures)

Taking pictures that match the scene being recorded

(Scene mode)

When you select a scene mode to match the subject and recording situation, the camera sets the optimal exposure and hue to obtain the desired picture.

•Refer to P43 to 49 and “About the information ” for details about each scene mode.

1Move 3/4/2/1 to select the scene mode.

A

•Move 4 at A to switch to the next menu screen.

•You can switch menu screens from any menu item by rotating the zoom lever.

2 Press [MENU/SET] to set.

•The menu screen is switched to the recording screen in the selected scene mode.

•To change the scene mode, press [MENU/SET], then move 1, and repeat steps 1and 2 above.

42

∫About the information

•If you press [DISPLAY] when selecting a scene mode in step 1, explanations about each scene mode are displayed. (If you press [DISPLAY] again, the screen returns to the [SCENE MODE] menu.)

•Refer to P37 for information about the shutter speed.

•The flash setting is memorized even if the camera is turned off. However, the scene mode flash setting is reset to the initial setting when the scene mode is changed.

•When you take a picture with a scene mode that is not adequate for the purpose, the hue of the picture may differ from the actual scene.

•When [MENU/SET] is pressed and the

menu screen is displayed, [] is selected in the [SCENE MODE] menu.

You can set each of the settings by moving 4 and selecting [REC] mode menu [] or [SETUP] menu [].

•The following items cannot be set in scene mode because the camera automatically adjusts them to the optimal setting.

–[INTELLIGENT ISO]

–[SENSITIVITY]

–[COL.MODE]

VQT1J59