Panasonic DMC-FX55 operating instructions Canceling setting

Advanced (Recording pictures)

[ ]:[AUTO The Power LCD is POWER LCD] automatically activated in

bright places such as outdoors etc. When the power LCD is activated, [ ] changes to [ ].

[ ]: The LCD monitor [POWER LCD] becomes brighter and

easier to see even when taking pictures outdoors.

[ ]:	The LCD monitor is
[HIGH ANGLE] easier to see when taking
	pictures with the camera
	held high above your
	head. This is useful when
	you cannot get close to
	the subject because
	there is a person in the
	way. (However it
	becomes more difficult to
	see when looked at
	straight on.)

[OFF]	The LCD monitor returns
	to the normal brightness.

3 Press [MENU/SET].

A

AThe [AUTO POWER LCD] icon

([ ]([ ])), [POWER LCD] icon

([ ]) or [HIGH ANGLE] icon ([ ]) appears.

34

∫Canceling setting

If you press and hold [LCD MODE] again for 1 second the screen shown in step 2 is displayed. Select [OFF] to cancel a setting.

•High angle mode is also canceled if you turn the camera off or power save mode is activated.

•The brightness of the pictures displayed on the LCD monitor screen are increased in Auto Power LCD, Power LCD and High angle modes. Therefore, some subjects may look different on the LCD monitor. However, this does not affect the recorded pictures.

•The LCD monitor automatically returns to normal brightness after 30 seconds when recording in Power LCD mode. Press any button to make the LCD monitor bright again.

•If the screen is difficult to see because of light from the sun etc. shining on it, use your hand or another object to block the light.

•Auto Power LCD and High angle mode are not activated in the following cases.

–When the clipboard is playbacked in clipboard mode [ ]

–In playback mode []

–In print mode [ ]

–While the menu screen is displayed

–While the review screen is displayed

Taking Pictures using the Built-in Flash

VQT1J59