Connect the charger to the electrical outlet.
• Disconnect the charger from the electrical socket and detach the battery after charging is completed.
∫About the [CHARGE] indicator
The [CHARGE]
indicator turns on: The [CHARGE] indicator A is turned on and charging will start.
The [CHARGE]
indicator turns off: The [CHARGE] indicator A of the charger will turn off once the charging has completed without any problem.
•When the [CHARGE] indicator flashes
–The battery temperature is too high or too low. It is recommended to charge the battery again in an ambient temperature of between 10 oC to 30 oC (50 oF to 86 oF).
–The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
∫Charging time
Charging time | Approx. 130 min |
|
|
∫Approximate operating time and number of recordable pictures
Number of recordable pictures | Approx. 300 pictures |
Recording time |
|
Approx. 150 min | |
Playback time |
|
Approx. 200 min | |
|
|
Recording conditions by CIPA standard
•CIPA is an abbreviation of [Camera & Imaging Products Association].
•Program AE Mode
•Temperature: 23 oC (73.4 oF)/Humidity: 50%RH when LCD monitor is on.
•Using a Panasonic SD Memory Card (32 MB).
•Using the supplied battery.
•Starting recording 30 seconds after the camera is turned on. (When the Optical Image Stabilizer function is set to [AUTO].)
•Recording once every 30 seconds with full flash every second recording.
•Rotating the zoom lever from Tele to Wide or vice versa in every recording.
•Turning the camera off every 10 recordings and leaving it until the temperature of the battery decreases.
14 VQT2X83 (ENG)
