Panasonic DMC-GX7 Adjust the angle of the monitor/viewfinder, Using the Viewfinder, Press LVF

Preparation

Adjust the angle of the monitor/viewfinder

Adjust the angle of the monitor/viewfinder.

•Be careful not to catch your finger, etc. in the monitor/viewfinder.

•When adjusting the angle of the monitor/viewfinder, be careful not to apply too much force, as this may cause damage or malfunction.

•When not using this unit, close the monitor/viewfinder completely back to the original position.

Using the Viewfinder

∫Using the eye sensor to switch between the Monitor and Viewfinder

When [LVF/Monitor Auto] of [Eye Sensor] in the [Custom] menu is set to [ON] and your eye or an object is brought close to the viewfinder, the display automatically switches to the viewfinder display.

AEye sensor

B[LVF]/[Fn4] button

ロヷョバョㄏフ

∫Switching the Monitor/Viewfinder manually

Press [LVF].

The Viewfinder lights only when your eye or an object is moved closer to it.

[LVF]/[Fn4] button can be used in two ways, as [LVF] or as [Fn4] (function 4). At the time of purchase, it is initially set to [LVF/Monitor Switch].

•Refer to P23 for details about the function button.

∫Diopter adjustment

Slide the diopter adjustment lever so that the characters displayed in the viewfinder can be seen clearly.

20 VQT5A95 (ENG)