Preparation
20
Attaching the Strap
11Pressing both sides of the
cover.
2Pull out the black strap holder
completely.
2Detach the black strap holder from
the metal fitting.
• When the black strap holder is
completely detached, attach it
again as above.
3Pass the metal fitting through the
eyelet of the camera.
4Rotate the black strap holder in
the opposite direction until it
clicks.
5Slide the cover until it is attached
firmly.
• Attach the strap to the other side of the
camera being careful not to twist it.
• Attach the strap so that you can see
“LUMIX” logo.
• Check if the strap is firmly attached to
the camera.
LC1PP.book 20 ページ ２００４年１月２６日　月曜日　午後６時５０分