Panasonic Accessing DCIM and MISC Folders without PHOTOfunSTUDIO on Your PC or Mac

Connecting to other equipment

∫Copying to a PC without using “PHOTOfunSTUDIO”

If the installation of “PHOTOfunSTUDIO” fails, you can copy files and folders to your PC by dragging and dropping them from the camera after connecting to your PC.

Directory structure of built-in memory/card of this unit is shown by the figure below.

For Windows:	A drive ([Removable Disk]) is displayed in [Computer]
For Mac:	A drive ([NO_NAME]) is displayed on the desktop

•Built-in Memory

•Card

			DCIM:	Images
DCIM			1 Folder number
	100_PANA		2 File number
			3 JPG:	Still pictures
		P1000001.JPG	MOV:	Motion pictures
			MISC:	DPOF print
		P1000002.JPG		Favorite
		P1000999.JPG
	101_PANA
	999_PANA
MISC

•A new folder is created when pictures are taken in the following situations.

–When a card containing a folder with the same folder number has been inserted (Such as when pictures were taken using another maker of camera)

–When there is a picture with file number 999 inside the folder

∫Disconnecting the USB connection cable safely

Select the [] icon in the task tray displayed on the PC, and then click [Eject DMC-XXX] (XXX varies by model).

•Depending on your PC’s settings, this icon may not be displayed.

•If the icon is not displayed, check that [Access] is not displayed on the LCD monitor of the digital camera before removing the hardware.

∫Connection in the PTP Mode

Select [PictBridge(PTP)] when connecting USB connection cable.

•Data can now be read only from the card in the PC.

•When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP Mode.

- 103 -