Panasonic DMC-SZ8 operating instructions Pal, Built-in memory or card is formatted

Basic

[Reset Wi-Fi Settings]

Reset all settings in the [Wi-Fi] menu to factory default settings.

•Always reset the camera when disposing or selling it to prevent personal information saved within the camera from being misused.

•Always reset the camera after making a copy of personal information when sending the camera in to be repaired.

[TV Connection]

Set to match the colour television system in each country or the type of TV.

[] ([Video Out]): [NTSC]:

Video output is set to NTSC system.

[PAL]:

Video output is set to PAL system.

[ ] ([TV Aspect]): [W]:

When connecting to a 16:9 screen TV. [X]:

When connecting to a 4:3 screen TV.

•This will work when the AV cable (optional) is connected.

[Version Disp.]

It is possible to check which version of firmware is on the camera.

•Press [MENU/SET] on the version display screen to display information about the software on the unit.

[Format]

The built-in memory or card is formatted.

Formatting irretrievably deletes all the data so check the data carefully before formatting.

•Do not turn the camera off during formatting.

•If a card has been inserted, only the card is formatted. To format the built-in memory, remove the card.

•If the card has been formatted on a PC or other equipment, format it on the camera again.

•It may take longer to format the built-in memory than the card.

•If the card cannot be formatted, please try another card before contacting Panasonic.

~[Language]

Set the language displayed on the screen.

•If you set a different language by mistake, select [~] from the menu icons to set the desired language.

- 45 -