Option Card Installation

Follow the steps in this section to install either of the following options:

•Tri-Port Interface Card

•Hard Disk.

An option card is easily damaged by static electricity. Touch something metal to discharge any static electricity before you touch it.

Accessing the System Board from the Right

Complete the following steps before you install the option card:

1	Unplug the printer power cord.
2	Disconnect all cables from the back of the printer.
3	Push on the thumb indention, located on the right side of
	the system board access cover, and slide the cover to the
	right until it releases.
4	Pull the cover away from the printer.
5	Continue with the section “Installing an Option Card” on
	the next page.

Appendix C: Printer Options ❖ C-21