
Loading Paper
Using Tray 2 The optional Tray 2 can be used for several different types of paper. See the Supplies/Options Guide for sizes and
capacity.
To Load Tray 2:
1 |
2 |
Squeeze the tab located on the width guide lever and slide the width guide lever to the far left side of the tray.
If you are loading envelopes, go to Step 4 on page
Flex the sheets back and forth to loosen them, then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.
3 Place the print material against the right side of the input tray with the recommended print side facing you and the top edge in first. (Insert letterhead paper with the top of the page facing down.) Go to Step 5 on page
Do not overfill Tray 2 because the print material may not feed correctly through the printer or you may get a paper jam.