Xerox C20 manual Wiping Printheads, Position. See the section To Position the Print Cartridge

Cleaning Your Printer

Wiping the

Printheads

Wipe the printheads only if you have run the cleaning printheads test to clean the printheads and the print quality is not satisfactory. Wiping the printheads removes dried ink from the printheads.

1	Move the print cartridge carrier into the installation
	position. See the section “To Position the Print Cartridge
	Carrier” (page 4-3)for more information.
2	Remove the print cartridges. See the procedure “To Replace
	the Print Cartridges” (page 4-4) for more information.
3	Use a clean, damp cloth to wipe gently the entire copper
	contact area and the printheads as shown. To dissolve
	dried ink, hold the damp cloth against the printheads for
	about three seconds. Gently blot and wipe dry.
	When cleaning the color print cartridge, wipe the
	printheads in one direction so the colors do not
	mix
4	Allow the copper contact area to dry.

4-18 ❖ DocuPrint C20/NC20 User Guide