![](/images/new-backgrounds/1196522/196522303x1.webp)
Option Card Installation
Installing an Option Card
Complete the following steps to install either the
1 |
2 |
3 |
4 |
5 |
Remove the two screws from the metal plate covering the opening for the cable connector. Save the screws.
Grasp the tab on the end of the metal plate and pull the plate straight out. Discard the metal plate.
Unpack the option card. See the packing materials.
To complete the following installation instructions, you should be at eye level with the printer option card slot.
Locate the option card connector on the printer system board. It is located inside the printer. You can access it through the option card slot.
Locate the card guide inside the option card slot on the left side of the slot.