2Getting Set Up
Setting up an earlier version of the LaserWriter 8.x driver
1.Make sure that the LaserWriter 8.x driver is installed on your Macintosh.
If the LaserWriter 8.x driver is not installed:
The LaserWriter 8.x driver software is available from Apple Computer; see your local Apple dealer for details. Refer to the LaserWriter driver’s documentation, LaserWriter 8.x Update Guide, for instructions on installing the driver.
2.Follow the instructions in “Installing the printer’s software” on page
3.Open the Chooser.
4.Select the LaserWriter 8 driver icon.
5.Select your printer from the list.
6.Still in the Chooser, click the Setup button to see a list of options.
7.In the dialog box that appears, click the More Choices button to see the full range of options.
Note Do not use the Auto Setup button; errors can occur with the PPD files. Continue with this procedure to properly set up the driver.
8.Click the Printer Info button, then click the Update info button in the next dialog box.
9.Record the information on PostScript Version and Total Memory Installed; you will need this information later. Click OK.
10.Click the Select PPD button; the Printer Descriptions folder in the Extensions folder, inside the System Folder, is displayed.
