Tektronix 340 manual Connecting multiple disks

Expanding Your Printing System B

Connecting multiple disks

Caution To avoid damaging components, turn off the computer, printer, and external disk before you connect or disconnect a SCSI cable. Turn on the disks before you turn on the printer.

1.SCSI port

2.External disks

3.Terminator (not required if the end disk has a built-in terminator if you have a Phaser Copystation connected at the other end of the chain). The middle disk must not have an internal terminator).

Each disk must have a unique SCSI ID number. Do not turn on the printer or disk until each disk has a unique number.

Note See “Interface cables and adapters” on page 5-3 for cable ordering information.

1 2 3

Ethernet®	PHASER 340		1	2
			Service	Reset	Second
	Service	SCSI Disk	Parallel		Feeder
	Only

9101-44

User Manual B-11