Tektronix 340 manual Waiting For Manual

	Troubleshooting 6
Front panel messages (cont'd.)
Message	Action
Cleaning	No user action required. The printer is running an
	automatic cleaning operation.
Waiting For Manual	Insert paper or transparency in the manual feed slot.
Feed
Waiting For	The print job specifies transparency but the printer
Transparency	detects that the paper tray is installed. Load
	transparency in the media tray and press OK .
Waiting For Paper	The print job specifies paper but the printer detects that
	the transparency tray is installed. Load paper in the
	media tray and press OK .
Upper Media Tray	Add paper or transparencies to the standard media
Empty	tray.
Media Tray Empty	Add paper or transparencies to the media tray.
Lower Media Tray	Add paper to the lower media tray.
Empty
Replace Upper	Insert the standard media tray.
Media Tray
Replace Media Tray	Insert the standard media tray.
Replace Lower	Insert the lower media tray.
Media Tray
Incorrect Media	An incorrect paper size is loaded in the tray or paper
Size	narrower than A4-size is in the manual feed slot. Use
	Letter- or A4-size media.
Manual Feed Paper	The printer requires a sheet of paper for cleaning but
	the media tray contains transparency. Feed a sheet of
	paper into the manual feed slot.

Fault. Service Required

Turn the printer off, wait at least 15 seconds and turn the printer’s power on again. If the failure persists, note the code number in the display. In the U.S., call Tektronix service at 1-800-835-6100. Outside the U.S., contact your local Tektronix office.

User Manual 6-9