Tektronix 340 manual Unlocking the transit restraint

Getting Set Up 2

Unlocking the transit restraint

Caution To avoid damaging the printer, always turn the printer power off using the On/Off switch before locking or unlocking the transit restraint.

1.Turn the printer power off using the rear-panel On/Off switch.

2.The transit restraint lock is located on the right side of the printer. Insert a wide flat-blade screwdriver into the lock slot.

3.While pushing inward with slight pressure, turn the lock button counterclockwise until it springs out flush with the side of the printer.

3

2

9101-03

Caution If you move or ship the printer, be sure to lock the transit restraint to protect the printhead from damage. Refer to “Locking the transit restraint” on page C-2 for more information.

User Manual 2-11