Tektronix 340 manual Setting up the printer, Quick-Start Installation guide

2Getting Set Up

Setting up the printer

The printer is shipped to you already loaded with ink. To set up the printer for use, follow these basic steps as described in this chapter:

■Remove the packing material from the printer

■Optional: Install the Lower Paper Tray Assembly

■Unlock the printer transit restraint

■Install the start up maintenance tray

■Load ink sticks

■Select a media tray configuration

■Load the media tray(s)

Note To ensure proper printer operation, install the printer on a flat

surface having no more than 3 degrees of tilt. This is approximately equivalent to lifting one side of the printer up 2 cm (0.75 inches) off of a flat surface.

Quick-Start Installation guide

A Quick-Start Installation guide is included with the printer. You may want to reference the instructions in this guide as you set up the printer.

Removing the packing material

Remove the plastic bag and packing materials surrounding the printer.

Note Save all boxes and packing material in case you need to ship the printer later.

2-8 Phaser 340 Color Printer