Tektronix 340 manual Getting Set Up

Getting Set Up 2

13.Click Close in the Install PostScript Printer from PPD dialog box.

14.At the message, click OK; the Control Panel opens.

15.From the Control Panel, double-click Printers.

16.In the Printers dialog box, select the Tektronix Phaser 340 printer you just installed, then click Connect.

17.In the Connect dialog box, select the port the printer is connected to, then click OK.

Note Refer to the README file on the Adobe PS3 Driver for Windows 3.1 diskette from Tektronix, or to the Adobe PostScript Printer Driver User Guide, for more detailed information on installing and using the Adobe PS3 driver.

When you are done installing the Windows 3.1 driver, refer to “Installing optional fonts” on page 2-52.

User Manual 2-37