Tektronix 340 manual Not Installed, as appropriate

Getting Set Up 2

11.Highlight one of the following PPD files you installed in Step 2, and click Select:

■Use the TK340172.PPD file with the standard version of the printer.

■Use the TK340692.PPD file with the extended features configuration of the printer.

Note If you are not sure whether your printer has the standard configuration or the extended features option, print the startup page from the Help Pages menu in the front panel. This page includes an entry for Extended Features: Yes if installed, No if it is not.

12.Make sure the information under Printer Model matches the printer you have and the PostScript Version information you got in Step 9.

13.Click Select.

Note If the information under Printer Model is not an exact match, use the closest printer name, and call Tektronix Customer Support in the U.S. and Canada at 1-800-835-6100for the latest PPD file. Outside the U.S. and Canada, contact your local Tektronix reseller. You can also download the latest PPD files from the Tektronix Bulletin Board Service (BBS); see page 6-1.

14.Click Configure. In the field for Memory Configuration under Installable Options, select the amount of memory your printer has installed. Check other options either Installed or

Not Installed, as appropriate.

15.Click OK in two dialog boxes and close the Chooser.

When you are done installing drivers, refer to “Installing optional fonts” on page 2-52.

User Manual 2-49