Tektronix 340 manual JamOpen Front Cover, MessageAction

6Troubleshooting

Front panel messages (cont'd.)

MessageAction

Jam:Open Front Cover

Open the front cover and remove the paper jam from the manual feed slot or behind the front cover. You may need to push on both sides of the maintenance tray to relatch it or clean the upper or lower paper feed rollers.

Jam:Retry Manual	Remove the media from the manual feed slot and
Feed	re-insert it.
Jam:Open Exit	Open the exit cover and remove the paper jam. You
Cover	may need to clean the paper exit path.
Jam:Remove Upper	There is a paper jam at the standard media tray.
Tray	Remove the tray and the jammed paper. You may need
	to run the Clean:Paper Jams routine.
Jam:Remove Lower	There is a paper jam at the lower paper tray. Remove
Tray	the tray and the jammed paper.
Jam:Remove Media	There is a paper jam at the paper tray. Remove the tray
Tray	and the jammed paper. You may need to run the
	Clean:Paper Jams routine.
Ink Low/Out of Ink	The Ink Low message appears when ink level drops to
	one-half stick. Open the top cover and add the
	appropriate color of ColorStix solid ink stick.
Maintenance Tray	The Maintenance Tray Low message appears when
Low	the tray is nearly empty. Open the front cover, remove
	the maintenance tray, and replace it with a new one.
Replace	Open the front cover, remove the maintenance tray,
Maintenance Tray	and replace it with a new one.
Maintenance Tray	Insert a maintenance tray into the printer.
Missing
Maintenance Tray	The printer has locked the maintenance tray because
Locked	hot ink is present. Wait for a few minutes before trying
	to remove the maintenance tray.
Waste Tray Full	Open the front cover, remove the maintenance tray and
	empty the waste tray.
Standby	Press Wakeup or send a print job to bring the printer
	to Ready.
Energy Star Mode	Press Wakeup or send a print job to bring the printer
	to Ready.

6-8 Phaser 340 Color Printer