Tektronix 340 manual PhaserShare network and serial connections, Scsi connections

Getting Set Up 2

PhaserShare network and serial connections

Optional PhaserShare cards provide Ethernet, Token Ring, or LocalTalk/serial connections for the printer. PhaserShare cards can be purchased initially with the printer as an installed option or later as a separate upgrade kit. If purchased initially, you will find the PhaserShare network manuals included in the shipping box with your printer. If you purchased a PhaserShare card as an upgrade kit, install the card using the directions provided with the upgrade kit.

PhaserShare network interfaces offer high performance and flexible workgroup connectivity. All data input ports and network protocols are simultaneously active. Print jobs are processed on a first-come, first-served basis.

The PhaserShare Network Cards and Software System Administrator Manual contains all the information necessary for configuring and using the optional connections. For ordering information, refer to Appendix B. Refer to “Interface cables and adapters” on page 5-3 in this manual for information on ordering serial cables.

SCSI connections

The SCSI port is used for connecting these optional peripheral devices:

■Phaser Copystation

To set up the Phaser Copystation and to connect it to your printer, refer to Chapter 2 of the Phaser Copystation User Manual. Refer to “Phaser Copystation” on page B-7 for ordering information.

■External font disk

Refer to “Adding a hard disk for font storage” on page B-8 for more information.

Refer to “Interface cables and adapters” on page 5-3 for information on ordering SCSI cables.

User Manual 2-23