Tektronix manual Installing the optional Phaser Copystation, 10Phaser 340 Color Printer

2Getting Set Up

Install the Lower Paper Tray Assembly using these steps:

1.Remove the tray from the Lower Paper Tray Assembly. Remove the shipping block from the tray and replace the tray in the Lower Paper Tray Assembly.

2.Place the printer on top of the Lower Paper Tray Assembly.

3.Make sure that the left and right alignment pins fit in the holes in the base of the printer.

4.Plug the Lower Paper Tray Assembly cable into the printer.

2

2

4

3

9101-02

To move the printer more than a few feet, it is easier to disconnect the Lower Paper Tray Assembly and move the printer separately from the Lower Paper Tray Assembly.

Installing the optional Phaser Copystation

The optional Phaser Copystation allows your color printer to be used as a color copier. Refer to “Phaser Copystation” on page B-7 for ordering information.

To set up the Phaser Copystation and to connect it to your printer, refer to

Chapter 2 of the Phaser Copystation User Manual.

2-10Phaser 340 Color Printer