Tektronix 340 manual Printing from Windows 3.1 and Windows NT

Printing 3

Printing from Windows 3.1 and Windows NT

Note Printing from a PC through an interface port other than the parallel port requires that an optional PhaserShare card be installed in the printer.

1.Make sure that you have installed the printer software for Windows 3.1 or Windows NT, as described in Chapter 2. If you have not, do so now.

1.From the Control Panel, double-click Printers.

2.In the Printers window, select the Phaser 340 printer, then click Setup. A dialog box appears with the printer’s name across the top.

3.Click on any of the tabs along the top of the dialog box to view and make selections that control the print features (for example, the Features tab controls resolution, color correction modes, and installable options).

For information on print features, see “Selecting print features” on page 3-8. Refer to the Phaser 340 Drivers and Utilities Printing Reference for detailed information.

User Manual 3-3