Tektronix 340 manual Image quality problems contd, Printing in the Chooser set to Off

	Troubleshooting 6
Image quality problems (cont'd.)
Symptom	Solution
600 x 300 dpi prints look	600 x 300 dpi mode is for paper only and is not included
like 300 dpi quality.	in the Phaser 340 standard configuration. Refer to “Print
	quality modes” on page 3-8.
Print is wrinkled.	You may be using paper that is too thick or thin. Refer to
	“All about media” on page 3-15.
Paper edge is rippled.	You may be using the wrong grain paper. Load
	long-grained paper. Refer to “All about media” on
	page 3-15.
Printed image is shifted,	■ You may have to make adjustments in the application
the wrong color, or	or print driver. Refer to “Printing and installation
margins are not correct.	problems” on page 6-13.
	■ Make sure that the paper is not curled. Also refer to
	“Cleaning for ink smears: paper feed rollers” on
	page 4-29.
	■ Microsoft PowerPoint users need to leave Background
	Printing in the Chooser set to Off.
Colors do not print as	Refer to the Phaser 340 Drivers and Utilities Printing
expected.	Reference for details on how to select TekColor color
	corrections. You may have attempted to print
	transparency loaded in a paper tray but did not specify
	transparency as the print media in the printer driver.

User Manual 6-11