Tektronix manual Cleaning for light stripes printhead, 18Phaser 340 Color Printer

4Caring for Your Printer

Cleaning for light stripes: printhead

Approximate time to complete: 3-10 minutes

If your prints have 1/10 in. (2.5 mm) lengthwise stripes that are the wrong color or have missing colors, you can correct the problem by cleaning the printhead. The printer automatically executes a printhead cleaning sequence when you run the Clean:Light Stripes routine from the front panel.

A 9101-48

1.When the printer is on and the Ready message appears, press the Clean button. The printer displays the first selection in the menu:

Clean:Light Stripes

<---- Clean Test

2.Press the Clean button once again.

3.A series of front panel messages indicate the condition of the printer as it progresses through a sequence of automatic cleaning routines. The printer outputs a cleaning page at the end of the cleaning sequence that you may discard as normal office waste.

4.When the cleaning sequence is completed, the printer displays the following message:

Clean:Light Stripes

<---- Clean Test

4-18Phaser 340 Color Printer