Tektronix 340 manual Moving Your Printer, Removing the maintenance tray

Appendix

C Moving Your Printer

Before turning off the printer, wait for it to display the Ready message.

Turn off the printer using the rear-panel On/Off switch.

Caution To avoid damaging the printer, let the printer cool down for at least 30 minutes before you move it so that the ink has time to solidify.

Before you move the printer, you’ll want to complete the steps presented in this chapter.

Removing the maintenance tray

1.Remove the maintenance tray from the printer, keeping it level. Remove, empty, and replace the waste tray. Refer to “Emptying the waste tray” on page 4-5 for detailed instructions.

2.Place the maintenance tray in a plastic bag and seal the bag.

The maintenance tray contains drum fluid that leaks if the tray is tipped. Keep the maintenance tray level and in a sealed plastic bag while transporting it.

Caution To avoid damaging your printer and invalidating your printer’s warranty, remove the maintenance tray before moving the printer. Always store a used maintenance tray in a leak-proof package. When handling the maintenance tray, keep it level. Never ship a partially used maintenance tray. Contact with the drum fluid poses no known health risk. Refer to “MSDS for silicone oil” on page D-7 for more information.

User Manual C-1