2Getting Set Up
5.Install the Tektronix Phaser 340 printer driver. From the Printer menu, select Create Printer; the Create Printer dialog box appears.
6.Under Driver, scroll to the end of the list and select Other; the Install Driver dialog box appears.
7.When prompted, do one of the following.
■If you are using the Phaser 340
Type in the
■If you are using the Tektronix Printer Software for Windows diskette:
Type in the disk drive location of the diskette. Click OK; the Select Driver dialog box appears.
■If you are using an edited copy of the PRINTER.INF file from Step 2:
Type in the disk drive location of the diskette. Click OK; the Select Driver dialog box appears.
8.Under Printer Driver, choose your Phaser 340 printer from the list, then click OK.
■Select Tektronix Phaser 340 if you have the standard configuration of the printer.
■Select Tektronix Phaser 340 with 600 dpi if you have the printer’s extended features option.
Note If you are not sure whether your printer has the standard configuration or the extended features option, print the startup page from the Help Pages menu in the front panel. This page includes an entry for Extended Features: Yes if installed, No if it is not.
