Tektronix manual Loading media trays, Media Sampler kit 16Phaser 340 Color Printer

2Getting Set Up

When you add the Lower Paper Tray Assembly to the printer, you can select between paper printing (lower tray) and transparency printing (upper tray) without leaving your computer. Refer to “Optional media trays” on

page B-3 for ordering information.

Standard paper tray: You can use the standard paper tray to print on transparencies. However, when you print you’ll need to follow these instructions:

a.Select Transparency as the Media Source in the Tektronix printer driver.

b.When the printer’s front panel message prompts you, load the transparency media, confirm your action using the front panel, and continue printing.

c.When printing is completed, remove the extra transparency media from the paper tray and replace paper media.

Loading media trays

The standard tray shipped with the printer accepts common office Letter-size (8.5 x 11 in.) paper ranging from 16 – 32 lbs. An optional A4-size (210 x 297 mm) paper tray supports printing on common office A4-size paper. Optional transparency trays are also available for Letter- size and A4-size transparency printing.

The optional Lower Paper Tray Assembly can be ordered with either a Letter- or an A4-size paper tray for printing on paper ranging from

60 – 120 g/m2 (16 – 32 lbs.). For more information about media types, refer to “All about media” on page 3-15.

Note Samples of paper and transparency media are included in the

Media Sampler kit.

2-16Phaser 340 Color Printer