Tektronix 340 manual PC Software for Microsoft Windows

Getting Set Up 2

PC: Software for Microsoft Windows 3.1

The following procedure automatically installs the Adobe PS3 printer driver and PostScript printer description files (PPDs) required by some applications. The Adobe PS3 driver works faster and more efficiently with the Adobe PostScript interpreter inside your Phaser 340 than other drivers, especially if you are using TrueType fonts.

Note If you are using the Tektronix floppy diskettes for installation, you will need both the Printer Software for Windows diskette and the Adobe PS3 Printer Driver for Windows 3.1 diskette for this procedure.

1.Make sure that Windows 3.1 is running on your PC.

2.The driver installation overwrites an older version of the Adobe PostScript printer driver. If you already have an Adobe driver installed, you may want to remove your installed Tektronix printers before continuing, and reinstall them later with the newer driver. Follow these steps to remove printers with an older driver:

a.From the Control Panel, double-click Printers.

b.In the Printers dialog box, select a printer that was set up with an older version of the Adobe driver, and click Remove.

c.Repeat Steps a and b for all printers installed with the Adobe driver.

d.After you have installed the new driver, you can reinstall your existing printers (PPDs) through the Adobe PostScript Printers dialog box in the Control Panel.

3.Quit all applications, including the Control Panel.

4.Insert either the Adobe PS3 Printer Driver for Windows 3.1 diskette or the Phaser 340 CD-ROM into the appropriate drive on your computer.

User Manual 2-35